Stainless Steel Mitred Top Fixed Bollard

products detail

Feature：

Made from top quality stainless steel 316L,this slope top bollard can be installed on the perimeter line of buildings to create a stand off distance.The stainless steel fixed bollards can be fitted with reflective taps for high visibility,there are has one groove toward the top of the bollard cover that allow the reflective tape to lay flush against the sleeve, greatly reducing the chances of the tape peeling.Scimitar bollards are ideal to discreetly protect sites where aesthetics and public perception are a consideration,widely used in the front of an airport terminal, sports stadium or a pedestrian retail area.

Head:

slope top is cut by laser cutting. Top plate is perfect for mounting a logo on.

Stainless steel fust:

Produced from diameter 139mm and 3mm wall thick stainless steel tube.

Reflective tap：

3M reflective tap is the standard option for the bollard .Reflective taps are available at a surcharge.

Finish:

The standard finish for this stainless steel bollard is satin brushed .Additional finished and colors are available upon request.

Installation Way:

surface mounted bollards are easy to install and relocate in existing concrete surfaces.

The advantage of use grade 316L (1.4401) stainless steel ：

Higher resistance to corrosion: Whilst stainless steel is corrosion resistant, the naturally forming chromium rich oxide film that protects it can be broken down over time by chlorine and chlorides. However, due to the increased levels of nickel in its alloy structure, grade 316L (1.4401) has a much higher resistance to corrosion.
 
Greater resistance to pitting and staining: In comparison with other grades of stainless steel, grade 316L (1.4401) is less susceptible to surface pitting.
 
Low Maintenance: As a result of its quality, grade 316L (1.4401) requires very little maintenance to retain its original appearance. This means that the material provides attractive 'life cost' benefits when compared to alternatives, such as carbon steels.
 
Recyclable: Stainless steel is 100% recyclable. Around 90% of stainless steel is made from recycled scrap. Due to this, stainless steel has much less of an impact on the environment and scarce resources, providing an all round "Green" material for architects to specify.