Stainless Steel Manual External Halyard System Flagpole

products detail

                                        Outdoor Stainless Steel Manual External Halyard System Flagpole

Feature：

This stainless steel external halyard flagpoles are great for commercial and residential use. They are made of stainless steel plate 304 and are available from heights of 20' to 80'. The windspeed rating is 105 - 120 mph，making them designed to be safely flown in areas that have high winds.
This model of external halyard flagpole is our factory direct pricing combined with our low overhead direct sales allows us to offer better quality products at much lower prices than you can find elsewhere.

Top Finial:

Top ball made from stainless steel with polish finished.The top ball has a single revolving truck with stainless steel bearing, which can rotate 360 degrees against the wind ,and the truck is equipped with aluminum pulley on one side to ensure that the flag rope will not be stuck at the top.

Pole:

The pole shaft is spun tapered from a stainless steel panel .

Flag：

The flagpole includes all of the accessories and fittings you will need to install the pole and raise the flag of your choice.

Halyard:

A halyard is the rope that is used to raise and lower the flag and to maintain the position that the flag is set at. External halyard are nylon and is provided as flagpole accessories.
You can purchase another one for backups.

Anchor Base:

The base plate is square with slotted holes for anchor bolts,and is cast from stainless steel A240.Spun aluminum flash collar is provided upon request.

Anchor Bolts:

Fabricated from galvanized steel Q235B ,Bolts are provided with four foundation bolts,three flat washers and lock washers.Each pole is offer one piece of rib reinforcement.

Finish:  

The standard finish for this commercial external halyard flag pole is satin brushed finished anodized finished.You can choose from many standard or custom powder paint colors or anodized finishes, or specify your own color.