aluminum commercial solar powered panel street light post

products detail

Aluminum Solar Street Light Post

Feature:

This single arm aluminum solar powered panel street light post,constructed from stainless steel 6063-T6, is 6 meter 19.69 feet) high with a wall thickness 4.0mm (0.157 inches) .The butt diameter is 200mm(7.87 inches )and tapers to 144mm(5.7 inches ) in diameter at the top.The design of this light post,brings a uniform lighting experience to a large space and solve potential obstacles to traffic to increase safety .They are used in parking lots, downtown areas, neighborhoods, walkways and building grounds.

Pole:

The pole shaft is round tapered,used premium raw material of powder and it can last for at least 30 years.

Luminaires Arm:

The luminaire arms are made of aluminum round tubes.For longevity and beauty, we use screws to connect the light arm to the light pole

Light Pole Hand Hole:

A reinforced hand hole with light pole hand hole cover,hardware and grounding bolts are provided with each pole.

Base Plate:

The base plate is square with four slotted holes for anchor bolts, fabricated from aluminum .The base plate and pole shaft is circumferentially welded top and bottom.

Light Pole Anchor Bolts:

Anchor bolts are rolled from galvanized steel Q235B .Each anchor bolts shall include:four steel hot dip galvanized anchor bolts each with two nuts and two flat washers sized to match the anchor bolts.

Finish:

Standard finish for this aluminum solar powered panel street light post is specified as powder coat finished and anodized finished.Additional finished option ,including satin brush finished and anodized finished.

Other Options:

The following options are available. Please consult our sales representative for details:
Hardware, custom tenon sizes, custom colors, luminaries, custom pole heights, additional handholes, custom base plate dimensions.