Slope Top Bolt Down Bollard

products detail

Feature：

This slope top bollard is contracted from 316L stainless steel with a 3 mm thick body.The external finish of the bollard is bright satin brushed as standard.Standard length is 1200mm, with 300mm being cast below ground, giving 900mm above ground.
Despite the material’s corrosion resisitant properties some care is required to maintain a bright appearance. The conditions that the bollard is in (Inland or Coastal area), will greatly increase its need for cleaning and care.

The stainless steel fixed bollards can be fitted with reflective taps for high visibility,there are has one groove toward the top of the bollard cover that allow the reflective tape to lay flush against the sleeve, greatly reducing the chances of the tape peeling.Slope top bollards are ideal to discreetly protect sites where aesthetics and public perception are a consideration,widely used in the front of an airport terminal, sports stadium or a pedestrian retail area.

Head:

slope top is cut by laser cutting. Top plate is perfect for mounting a logo on.

Stainless Steel Body:

Produced from diameter 139mm and 3mm wall thick stainless steel tube.

Reflective Tap：

3M reflective tap is the standard option for the bollard .Reflective taps are available at a surcharge.

Finish:

The standard finish for this stainless steel bollard is satin brushed .Additional finished and colors are available upon request.

Installation Way:

surface mounted bollards are easy to install and relocate in existing concrete surfaces.

Stainless Steel Maintenance:

Clean the stainless steel bollards using warm water with a mild detergent with a non-abrasive cloth or sponge. Heavier stains may require the use of a nylon-scouring pad or a stainless steel cleaner. To remove paint or graffiti use a cloth and Alkaline or solvent paints and strippers according to type of paint. In the case of a bead blasted finish, where abrasive cleaning is required.