Single Arm Stainless Steel Street Light Pole

products detail

                                           30 ft Single Arm Satin Brushed Finished Stainless Steel Street Light Pole

Feature：

The main material of the street light pole is stainless steel and aluminum,with the shape of round tapered,gourd shape,round straight,the concrete type and the size according to the user specific request to decide.

This model stainless steel street light pole , fabricated from stainless steel 304，has 80mm (3.15inches) diameter taper at the top with a 180mm (7.08inches) butt diameter at the base.it measures 9 meters (30ft) tall with a wall thickness of 3.0 mm .Variable arm length is 1.5m(4.92feet）.
The model has the advantages of good stability, long service life, high luminous efficiency, simple installation and maintenance, high safety performance, energy saving, environmental protection, economy and practicality.

Pole:

Street Light pole is constructed from Grade 304/316L Stainless Steel.

Luminaires Arms：

The side of the lamp arm can be welded or screwed. According to the current lamp design, the lamp is integrated with the lamp source, and the effect is better and more convenient.

Hand Hole：

Each street light poles has a handhole on the surface, and the position of the inspection port is 30 cm away from the ground. The door frame is for the purpose of connecting the rod to the pole and connecting the power supply. The door plate of the inspection port is also customized with a logo design, and the logo provided by the customer can be printed on the panel.

Anchor Base:

Each pole is equipped with a base for better ground stability and a more effective effect. It can also be fitted with a decorative cover to make it look better with the pole shaft. The shape of the base can be round or square, and there are more squares commonly used. The hole in the middle of the decorative cover is matched according to the diameter of the bottom of the rod.

Anchor Bolts:

Fabricated from galvanized steel Q235B ,Bolts are provided with four foundation bolts which have an "L" bend on lower end and one flat washers.The top of bolts have an square locating plate.

Finish: 

 Standard surface treatment for painted. Other surface treatment options are available upon request, including color spray and engraving, transfer, etc.