Guangdong Yaolong Metal Technology Co., Ltd.
What's question do you have about your project? Leave us a note:
We're not around right now,but leave us your information and we'll get in touch as soon as we can .Thanks! contact us
These internal halyard flagpoles made from aluminum are available in mounted heights from 20 ft. to 80 ft.This model internal halyard flagpole have a wall thickness range of 3 mm-6 mm and butt diameter range of 160 mm-280 mm with a wind speed rating of 67mph – 120mph
The Internal Halyard Flagpole conceals the flagpole rope on the inside of the flagpole. Internal Halyard flagpoles are more expensive than comparable external halyard flagpoles but they offer a more streamlined look and security. The rope is in the inside of the flagpole and travels up and out of the truck at the top of the flagpole. The rope is made of stainless steel cable and is secured near the bottom of the flagpole with a winch. The rigging is accessible and controlled after unlocking an access door.
So,this series of flag pole is suitable choice when you have a great budget and the security problem is concerned.
These commercial internal halyard flagpoles are cone tapered and precision fabricated of new 6063-T6 tubing.
Stainless steel aircraft cable,with a tensile strength of 1,408 pounds.
Designed for internal cable with winch assembly flagpoles only.
Flag sold separately ,and normally we won’t provide a flag unless request.
The internal halyard system conceals wire-center rope or stainless steel cable on the inside of the pole. These flagpoles have a more streamlined appearance since all of the rope or cable is on the inside of the pole. They also have more security since the halyard system is only accessible through a lock-able access door.
The aluminum door is cut by laser cutting machine and secured with two (2) tamper-proof 1/4-20NC screws.
Ground Set foundation-anchor bolts is fabricated from galvanized steel Q235B ,Bolts are provided with foundation bolts, flat washers and lock washers.Each pole is offer one piece of rib reinforcement.Spun aluminum flash collar are available to match pole.
The standard finish for this commercial internal halyard flag pole is satin brush aluminum finished.Additional finish or color option are available upon request.
Request A Quote