Commercial Manual External Halyard Flagpole

products detail

                                                   30 ft Commercial External Halyard Flagpole

Feature：

The external halyard flagpoles are a great option if you are looking for a high quality flagpole with an external rope. The advantage of the external halyard flagpole is that they typically have higher wind ratings and they also come with top ball base plate which has a revolving truck at one side so that the flag can swivel and reduce tangling on the flagpole.  It also comes with a flash collar that goes on the bottom of the flagpole that finishes off the look nicely. You can get a revolving truck and flash collar for the estate, but they are additional costs.

Available in height of 20 ft-100 ft,yaolong External Halyard Flagpoles over 20 feet are available for all business and commercial use.This commercial external halyard flagpole made from aluminum alloy 6063-T6 ,is sure to enhance the image of any office or business.

Top Finial：

Spun aluminum balls are constructed from heavy gauge aluminum with a flush seam. The attachment rod on each ball is threaded 1/2" (13NC) as standard. A jamb nut is supplied for use in firmly securing the ball to a truck assembly. Ball size should be at least the size of the base diameter of your flagpole.

Pole:

Alloy 6063-T6 aluminum tubing with uniform conical taper.

Flag：

The matching flag can be provides at a surcharge.Recommend flag specifications are:
Item No. Length * width(cm) Height
1# 192*288 H＞18
2# 160*240 13＜H≤18
3# 128*192 6＜H≤13
4# 96*144 H≤6

Cleats:

One 9-inch cast aluminum, each attached with two 5/16-inch stainless steel screws 

Anchor Base:

The base plate is square with slotted holes for anchor bolts,and is cast from die-cast aluminum ASTM A36.Spun aluminum flash collar finished to match pole.

Anchor Bolts:

Fabricated from galvanized steel Q235B ,Bolts are provided with four foundation bolts,three flat washers and lock washers.Each pole is offer one piece of rib reinforcement.

Finish:  

The standard finish for this commercial flag pole is satin brush clear anodized finished.Natural Aluminum color is the color we highly recommend.You can provide the color board for our reference, also can choose from the international general color board.