Guangdong Yaolong Metal Technology Co., Ltd.
What's question do you have about your project? Leave us a note:
We're not around right now,but leave us your information and we'll get in touch as soon as we can .Thanks! contact us
Yaolong’s commercial grade aluminum external halyard flagpoles are commonly used in Hotels, schools, conference centers, libraries, convention and exhibition center , etc.Made completely in the China ,and guaranteed for the lifetime of the flag pole, these poles are available in heights ranging from 40ft. The butt diameter range of 200mm (7.87inches) and the wall thickness range of 0.149inches contribute to the wind speed range of 70mph – 120mph .
Top ball with seamless surface is made from aluminum alloy 6063.The top ball is equipped with external revolving truck which has aluminum pulley on one side can rotate 360 degrees against the wind ,then the flag can fly freely through the wind direction changed.
The pole shaft is constructed from alloy 6063-T6 aluminum tubing with uniform conical taper.
The matching flag can be provides at a surcharge.
A halyard is the nylon rope that is used to raise and lower the flag and to maintain the position that the flag is set at.
The base plate is square with slotted holes for anchor bolts, fabricated from aluminum ASTM A36 .The base plate and pole shaft is circumferentially welded top and bottom.
Fabricated from galvanized steel Q235B ,hot dipped galvanized steel tubing welded to a square base plate.Bolts are provided with four foundation bolts,three flat washers and lock washers.
The standard finish for this commercial stainless steel flag pole is directional sanded satin ground.Additional finish options and colors are available according to customers’ request.You can provide the color board for our reference, also can choose from the international general color board.
|Aluminum dome top finial- can rotate 360 degrees against the wind to prevent flags from knotting.|
|Top ball base plate -Revolving internal truck with aluminum sheave and stainless steel bearing.|
|Hanging poles&Direction bead -double poles design can easy to take out the flag,direction bead can fix the position of the hanging poles to protect halyard rope from broke because of the high wind|
|Stainless steel flagpole snaps- 1 set w/ order|
|Nylon Halyard Rope-each with one stainless steel swivel snap hooks per halyard.|
|Aluminum external cleat, each attached With two Stainless Steel Screws|
|Grounding anchor bolts-each bolts have an "L" bend on lower end,the four claws can firmly embedded in the ground, enough stable to against the 12 typhoon.|
Request A Quote