30 Foot Manual External Halyard Flagpole

products detail

Product description:

♦The 30 feet external halyard flagpole is designed for residential area,square , park, school and commercial street.
♦ High quality aluminum tube does not rust. ensure the corrosion resistance of the product in the natural environment;it need less maintenance and care.
♦It is made of aluminum ally 6063-t6 by using foreign advanced spinning equipment and full numerical control technology without mould core.The pole shaft can be recycled and reused 100%, the melting temperature is low, and the energy saving and emission reduction responds to the national policy.

Top Ball：

Aluminum alloy color anodized ball with flush seam can rotate 360 degrees against the wind ,then the flag can fly freely through the wind direction changed.The side of the ball base plate is equipped with an aluminum pulley fully enclosed , which can ensure that the flag rope will not be stuck at the top.

Pole Shaft:

The pole shaft is made of Alloy 6063-T6 aluminum tubing with uniform conical taper.

Flag：

Our flag is sold as a supporting product of flagpole.The other flags are available upon request.

Anchor Base:

The base plate is square with slotted holes for anchor bolts,and is cast from die-cast aluminum ASTM A36.Each pole is offer one piece of rib reinforcement.

Anchor Bolts:

Ground Set foundation- galvanized steel Q235B base with four foundation bolts which have an "L" bend on lower end , flat washers and lock washers.Please consult the yaolong flagpole company for specific installation method of anchor bolts.

Finish: 

Anodized surface treatment. After anodizing, the product forms a 20mum closed film layer to ensure the corrosion resistance of the flagpole in any natural environment, and to ensure that the rod has no obvious discoloration within 25 years.

Polyester powder sprayed surface treatment. The surface of the flagpole can be sprayed with colored polyester powder, which has bright color, UV resistance and no fading.