12 meter stainless steel external halyard outdoor flag pole suppliers

products detail

12 Meter Manual Flag Pole And Flags

Feature：

This 12 meter stainless steel external halyard flag pole is one of the most popular styles sold,which design for to meet the most exacting architecture standards and great for applicable to awards, opening and closing ceremonies of large and small sports events.This commercial use stainless steel flagpole made from stainless steel 316L is available in size from 20ft to 60ft, basically can against wind speed from 140 Km/hour to 250Km/hour,making them designed to be safely flown in areas that have high winds.In addition, if you need a flag pole that goes up and down, we can also provide you with the corresponding technology.

Top Ball：

Top ball with seamless surface is made from aluminum alloy 6063.The top ball is equipped with top ball base plate which has aluminum pulley on one side can rotate 360 degrees against the wind ,then the flag can fly freely through the wind direction changed.We have a variety of top ball with flat top, dome top, onion top and other shapes for your choice

Pole: 

The pole shaft is rolled by stainless steel sheet, and integrated into shape.

Flag：

The matching flag can be provides at a surcharge.

Anchor Base: 

The base plate is square with slotted holes for anchor bolts, fabricated from ASTM A240 stainless steel .The base plate and pole shaft is circumferentially welded top and bottom.

Anchor Bolts:

Fabricated from galvanized steel Q235B ,Bolts are provided with four foundation bolts,three flat washers and lock washers.Each pole is offer one piece of rib reinforcement.

Finish:

The standard finish for this commercial stainless steel flag pole is satin brush finished. Additional finish options and colors are available according to customers’ request.You can provide the color board for our reference, also can choose from the international general color board.

Accessories：

	Aluminum flat top ball finial- can rotate 360 degrees against the wind to prevent flags from knotting.
	Top ball base plate -Revolving internal truck with aluminum sheave
	Hanging poles&Direction bead -double poles design can easy to take out the flag,direction bead can fix the position of the hanging poles to protect  halyard rope from broke because of the high wind.
	Stainless steel flagpole snaps- 1 set w/ order
	Nylon Halyard Rope-each with one stainless steel swivel snap hooks per halyard.
	Aluminum external cleat, each attached With two Stainless Steel Screws
	Grounding anchor bolts-each bolts have an "L" bend on lower end,the four claws can firmly embedded in the ground, enough stable to against the 12 typhoon.

Specification